Уноси
Search full-text
"Milan Sljivic"
-
Additive Manufacturing of Functional Parts based on Material Extrusion Technology (2016)
M. Šljivic, C. Fragassa, A. Pavlović, М. Kraišnik, J. Ilić, M. Stanojević, Additive Manufacturing of Functional Parts based on Material Extrusion Technology, CONTEMPORARY MATERIALS, Vol. VII-2, pp. 178 - 184, 2016 -
Advanced Investigation on Rapid Prototyping Techniques in Maxillofacial Surgery and Implanting Preparation (2014)
M. Stanojević, M. Šljivić, M. Plančak, D. Đurđević, Advanced Investigation on Rapid Prototyping Techniques in Maxillofacial Surgery and Implanting Preparation, Journal for technology of plasticity, Vol. 39, pp. 11 - 21, 2014 -
Implemenation of FEM and Rapid Prototyping in Maxillofacial Surgery (2016-06)
M. Šljivić, M. Stanojević, D. Đurđević, Implemenation of FEM and Rapid Prototyping in Maxillofacial Surgery, FME Transactions, Vol. 44, No. 4, pp. 422 - 429, Jun, 2016 -
Comparing the Accuracy of Professional and Consumer Grade 3D Printers in Complex Models Production (2017)
Sljivic M., Pavlovic A., Ilic J., Stanojevic M., Todorovic S., Comparing the Accuracy of Professional and Consumer Grade 3D Printers in Complex Models Production, FME Transactions, Vol. 45, No. 3, pp. 348 - 353, 2017 -
Polymers in Additive Manufacturing: the Case of a Water Pump Impeller (2017)
Pavlovic A., Sljivic M., Kraisnik M., Ilic J., Anic J., Polymers in Additive Manufacturing: the Case of a Water Pump Impeller, FME Transactions, Vol. Vol. 45, No. No.3, pp. 354 - 359, 2017 -
COMPRESSIVE PROPERTIES OF COMMONLY USED POLYMERS IN ADDITIVE MANUFACTURING PROCESSES (2017)
М. Кraišnik, M. Šljivic, J. Anić, J. Ilić, COMPRESSIVE PROPERTIES OF COMMONLY USED POLYMERS IN ADDITIVE MANUFACTURING PROCESSES, ACTA TECHNICA CORVINIENSIS, Vol. 10, No. 2, pp. 33 - 37, 2017 -
SOME ASPECTS OF DEVELOPMENT OF DUCTILE CRACK IN THE PROCESS OF COLD BULK FORMING (2017)
М. Kraišnik, M. Šljivić, J. Anić, J. Ilić, B. Mijatović, SOME ASPECTS OF DEVELOPMENT OF DUCTILE CRACK IN THE PROCESS OF COLD BULK FORMING, ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering, pp. 47 - 55, 2017 -
DEVELOPMENT OF SMALL BATCHES OF FUNCTIONAL PARTS USING INTEGRATION OF 3D PRINTING AND VACUUM CASTING TECHNOLOGY (2018)
M. Šljivić, М. Kraišnik, J. Ilić, J. Anić, DEVELOPMENT OF SMALL BATCHES OF FUNCTIONAL PARTS USING INTEGRATION OF 3D PRINTING AND VACUUM CASTING TECHNOLOGY, ACTA TECHNICA CORVINIENSIS, Vol. 11, No. 2, pp. 35 - 38, 2018 -
PRESOVANJE LEGURE ALUMINIJUMA METODOM PROTUSMJERNOG ISTISKIVANJA (1999-04)
Ž. Babić, M. Šljivić, O. Miletić, PRESOVANJE LEGURE ALUMINIJUMA METODOM PROTUSMJERNOG ISTISKIVANJA, ЗБОРНИК РАДОВА ДЕМИ '99, pp. 76 - 81, Apr, 1999 -
MEASURUMENT OF THE DEFORMATION FORCE IN DEEP DRAWING PROCESS (1999-04)
Ž. Babić, M. Šljivić, MEASURUMENT OF THE DEFORMATION FORCE IN DEEP DRAWING PROCESS, Proceedings of 2. International Conference on Industrial Tools - ICIT ‘99, pp. 1 - 5, Apr, 1999 -
НОВА ТЕХНОЛОГИЈА-THIXOFORMING (1999-04)
M. Šljivić, O. Miletić, Ž. Babić, НОВА ТЕХНОЛОГИЈА-THIXOFORMING, ЗБОРНИК РАДОВА ДЕМИ '99, pp. 66 - 71, Apr, 1999 -
VISOKOBRZINSKI PROCES PROŠIRIVANJA PRI SPAJANJU CIJEVI U IZMJENJIVAČIMA TOPLOTE (2000-04)
O. Miletić, M. Šljivić, D. Blagojević, Ž. Babić, VISOKOBRZINSKI PROCES PROŠIRIVANJA PRI SPAJANJU CIJEVI U IZMJENJIVAČIMA TOPLOTE, DEMI 2000, ZBORNIK RADOVA- PROCEDINGS, pp. 78 - 81, Apr, 2000 -
BRZA IZRADA PROTOTIPA PROIZVODA- MULTY-JET MODELING TEHNOLOGIJA (2000-04)
O. Miletić, M. Šljivić, Ž. Babić, M. Bojanović, BRZA IZRADA PROTOTIPA PROIZVODA- MULTY-JET MODELING TEHNOLOGIJA, DEMI 2000, ZBORNIK RADOVA-PROCEEDINGS, pp. 45 - 49, Apr, 2000 -
THE INFLUENCE OF TRIBOLOGICAL CHARACTEISTICS ON FORMABILITY IN DEEP DRAWING PROCESS (2000-05)
M. Šljivić, Ž. Babić, THE INFLUENCE OF TRIBOLOGICAL CHARACTEISTICS ON FORMABILITY IN DEEP DRAWING PROCESS, Proceedings of TPR 2000, pp. 197 - 202, May, 2000 -
UTICAJ TRIBOLOŠKIH USLOVA NA GRANIČNI STEPEN PRI DUBOKOM IZVLAČENJU (2001-04)
Ž. Babić, M. Šljivić, D. Adamović, UTICAJ TRIBOLOŠKIH USLOVA NA GRANIČNI STEPEN PRI DUBOKOM IZVLAČENJU, ZBORNIK RADOVA DEMI 2001, pp. 116 - 120, Apr, 2001 -
NOVE TEHNOLOGIJE U IZRADI KAROSERIJE AUTOMOBILA (2005-05)
Ž. Babić, M. Šljivić, NOVE TEHNOLOGIJE U IZRADI KAROSERIJE AUTOMOBILA, ZBORNIK RADOVA DEMI 2005, pp. 183 - 190, May, 2005 -
PARAMETRI RAZVLAČENJA LASERSKI ZAVARENIH LIMOVA (2007-05)
Ž. Babić, M. Šljivić, PARAMETRI RAZVLAČENJA LASERSKI ZAVARENIH LIMOVA, ZBORNIK RADOVA DEMI 2007, pp. 213 - 220, May, 2007 -
ODREĐIVANJE KARAKTERISTIKA OBRADIVOSTI ''TAILORED'' LIMOVA (2008-09)
Ž. Babić, S. Aleksandrović, M. Stefanović, M. Šljivić, ODREĐIVANJE KARAKTERISTIKA OBRADIVOSTI ''TAILORED'' LIMOVA, ZBORNIK RADOVA XXXII SAVETOVANJA PROIZVODNOG MAŠINSTVA, Sep, 2008 -
UTICAJ POLOŽAJA LINIJE ZAVARIVANAJ KOD DUBOKOG IZVLAČENJA TAILORED BLANKS (2009-05)
Ž. Babić, S. Aleksandrović, M. Šljivić, UTICAJ POLOŽAJA LINIJE ZAVARIVANAJ KOD DUBOKOG IZVLAČENJA TAILORED BLANKS, ZBORNIK RADOVA DEMI 2009, pp. 181 - 188, May, 2009 -
Accuracy, quality and benefit of stereolithography prepared with cone beam CT in maxillofacial surgery (2014-09)
D. Đurđević, M. Stanojević, M. Šljivić, С. Вујновић, Accuracy, quality and benefit of stereolithography prepared with cone beam CT in maxillofacial surgery, Sep, 2014