Items

• Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece (2021-10)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece, ACTA TECHNICA CORVINIENSIS, Vol. 14, No. 4, pp. 29 - 33, Oct, 2021

• Capability of micro-milling in machining of difficult-to-cut materials (2021-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Capability of micro-milling in machining of difficult-to-cut materials, International Scentific Journal Industry 4.0, Vol. 6, No. 6, pp. 218 - 221, Dec, 2021

• Experimental analysis and optimization of thin-walled tubular parts milling (2022-01)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Experimental analysis and optimization of thin-walled tubular parts milling, Journal of production engineering, Vol. 25, No. 4, pp. 6 - 12, Jan, 2022

• Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel (2019-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel, proceedings of IV International Scientific Conference Industry 4.0, pp. 283 - 286, Dec, 2019

• Energy consumption model of the face milling (2021-05)

  S. Tešić, Đ. Čiča, M. Zeljković, S. Borojević, B. Sredanović, G. Jotić, Energy consumption model of the face milling, Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021, pp. 89 - 93, May, 2021

• Experimental analysis and optimization of thin-walled tubular parts milling (2021-09)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Experimental analysis and optimization of thin-walled tubular parts milling, Proceeding of 14th International Scientific Conference MMA 2018, pp. 31 - 36, Sep, 2021

• Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V (2021-10)

  S. Tešić, M. Zeljković, Đ. Čiča, S. Borojević, B. Sredanović, Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V, Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021, pp. 96 - 101, Oct, 2021

• Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja (2022-10)

  S. Borojević, Đ. Čiča, B. Sredanović, S. Tešić, M. Ćulum, Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja, Zbornik radova sa 43. JUPITER konferencije, pp. 11 - 16, Oct, 2022

• Energy consumption analysis and parameter optimization in high-feed milling operation (2023-06)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Jokić, D. Kramar, Energy consumption analysis and parameter optimization in high-feed milling operation, Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023, pp. 41 - 46, Jun, 2023

• Capability of micro-milling in machining of difficult-to-cut materials (2023-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Capability of micro-milling in machining of difficult-to-cut materials, Proceedings of VI International Scientific Conference Industry 4.0, pp. 220 - 223, Dec, 2023

• Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts (2017)

  Dj. Cica,, Z. Milan, B. Sredanovic, S. Tesic, Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts, Journal of production engineering, Vol. 20, No. 2, pp. 34 - 38, 2017

• Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V (2019)

  S. Tešić, M. Zeljković, Đ. Čiča, Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V, TEHNIKA - MAŠINSTVO, Vol. 68, No. 5, pp. 677 - 682, 2019

• Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel (2019)

  B. Sredanović, Đ. Čiča, S. Tešić, D. Kramar, Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel, International Journal "Machines, Technologies, Materials", Vol. 13, No. 11, pp. 491 - 494, 2019

• Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques (2020)

  D. Cica, B. Sredanovic, S. Tesic, D. Kramar, Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques, International Journal of Machining and Machinability of Materials, Vol. 22, No. 2, pp. 153 - 164, 2020

• Dynamical Contact Parameter Identification of Spindle-Holder-Tool Assemblies Using Soft Computing Techniques (2020)

  Đ. Čiča, M. Zeljković, S. Tešić, Dynamical Contact Parameter Identification of Spindle-Holder-Tool Assemblies Using Soft Computing Techniques, Facta Universitatis, Series: Mechanical Engineering, Vol. 18, No. 4, pp. 565 - 577, 2020

• Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques (2024)

  Dj. Cica, B. Sredanovic, S. Tesic, D. Kramar, Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques, Applied Computing and Informatics, Vol. 20, No. 1-2, pp. 162 - 180, 2024

• Artificial neural networks model for the prediction of surface roughness in machining thin walled parts (2018)

  Dj. Cica, S. Borojevic, B. Sredanovic, S. Tesic, Artificial neural networks model for the prediction of surface roughness in machining thin walled parts, pp. 75 - 78, 2018

• ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS (2018-09)

  Dj. Cica, S. Borojevic, B. Sredanovic, S. Tesic, ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS, pp. 75 - 78, Sep, 2018

• Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining (2019)

  Dj. Cica, S. Tesic, B. Sredanovic, S. Borojevic, Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining, pp. 131 - 138, 2019

• Quality inspection of free-form surface parts (2019-05)

  G. Jotić, S. Tešić, Đ. Čiča, S. Jokanović, Quality inspection of free-form surface parts, Proceedings of International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI, May, 2019