Unosi

• Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report (2012)

  B. Sredanović, D. Kramar, G. Globočki-Lakić, J. Kopač, Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report, Project: New approach toward universal definition of machinability in machining, bilateral project BiH -Slovenia, pp. 1 - 10, Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems, Banja Luka, Ljubljana, 2012

• Contribution to defining of universal machinabilty, report (2012)

  B. Sredanović, D. Kramar, G. Globočki-Lakić, J. Kopač, Contribution to defining of universal machinabilty, report, Project: New approach towar universal definition of machinability in machining, bilateral project BiH-Slovenia, pp. 1 - 26, Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems, Banja Luka, Ljubljana, 2012

• Preliminary experimental research on micro-milling, report (2013)

  B. Sredanović, M. Hriberšek, D. Kramar, G. Globočki-Lakić, J. Kopač, Preliminary experimental research on micro-milling, report, Project: Study of universal machinability in cutting processes - part 2, hard-to-machine materials (continued of project bilateral cooperation 2012/2013) bilateral project BiH-Slovenia, pp. 1 - 13, Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems, Ljubljana, Banja Luka, 2013

• Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim) (2021)

  B. Sredanović, Đ. Čiča, D. Kramar, Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim), De Gruyter, Berlin, 2021

• Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece (2021-10)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece, ACTA TECHNICA CORVINIENSIS, Vol. 14, No. 4, pp. 29 - 33, Oct, 2021

• Capability of micro-milling in machining of difficult-to-cut materials (2021-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Capability of micro-milling in machining of difficult-to-cut materials, International Scentific Journal Industry 4.0, Vol. 6, No. 6, pp. 218 - 221, Dec, 2021

• Experimental analysis and optimization of thin-walled tubular parts milling (2022-01)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Experimental analysis and optimization of thin-walled tubular parts milling, Journal of production engineering, Vol. 25, No. 4, pp. 6 - 12, Jan, 2022

• Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition (2022-05)

  B. Sredanovic, D. Cica, S. Borojevic, S. Tesic, D. Kramar, Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition, TRIBOLOGY IN INDUSTRY, Vol. 44, No. 3, pp. 498 - 507, May, 2022

• Generating and characteristic of surfaces in mechanical machining of micro-parts (2019-05)

  B. Sredanović, G. Globočki-Lakić, D. Grguras, D. Kramar, F. Pusavec, Generating and characteristic of surfaces in mechanical machining of micro-parts, Proceedings of 6th International Conference on Tribology SERBIATRIB 19, pp. 468 - 473, May, 2019

• Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel (2019-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel, proceedings of IV International Scientific Conference Industry 4.0, pp. 283 - 286, Dec, 2019

• Experimental analysis and optimization of thin-walled tubular parts milling (2021-09)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Experimental analysis and optimization of thin-walled tubular parts milling, Proceeding of 14th International Scientific Conference MMA 2018, pp. 31 - 36, Sep, 2021

• Energy consumption analysis and parameter optimization in high-feed milling operation (2023-06)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Jokić, D. Kramar, Energy consumption analysis and parameter optimization in high-feed milling operation, Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023, pp. 41 - 46, Jun, 2023

• Capability of micro-milling in machining of difficult-to-cut materials (2023-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Capability of micro-milling in machining of difficult-to-cut materials, Proceedings of VI International Scientific Conference Industry 4.0, pp. 220 - 223, Dec, 2023

• Metal Cutting-theory and applications (2014)

  G. Globočki-Lakić, D. Kramar, J. Kopač, Metal Cutting-theory and applications, Faculty of Mechanical Engineering, University of Banja Luka and Faculty of Mechanical Engineering, University of Ljubljana, 2014

• Artificial Intelligence Advances in Research and Applications (2018)

  Dj.Cica, D. Kramar, Artificial Intelligence Advances in Research and Applications, Nova Science Publishers, 2018

• Contribution to material machinability definition (2012-06)

  D. Kramar, B. Sredanović, G. Globočki-Lakić, J. Kopač, Contribution to material machinability definition, Journal of production engineering, Vol. 15, No. 2, pp. 27 - 32, Jun, 2012

• Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining (2013)

  B. Sredanovic, G. Globocki-Lakic, Dj. Cica, D. Kramar, Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol. 59, No. 12, pp. 748 - 754, 2013

• Experimental research using of MQL in metal cutting (2013-06)

  G. Globočki-Lakić, B. Sredanović, D. Kramar, B. Nedić, J. Kopač, Experimental research using of MQL in metal cutting, TRIBOLOGY IN INDUSTRY, Vol. 35, No. 4, pp. 276 - 258, Jun, 2013

• Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study (2015)

  Dj. CIca, B. Sredanovic, D. Kramar, Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, Vol. 50, No. 1, pp. 49 - 64, 2015

• Analysis of Micro-Milling of Hardened Tool Steel (2016-01)

  B. Sredanović, G. Globočki-Lakić, D. Kramar, J. Kopač, Analysis of Micro-Milling of Hardened Tool Steel, Key Engineering Materials, Vol. 686, pp. 57 - 62, Jan, 2016