Unosi

• Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja (2014-10)

  B. Sredanović, G. Globočki-Lakić, D. Kramar, J. Kopač, Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja, Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3, pp. 130 - 135, Oct, 2014

• New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4 (2015)

  B. Sredanović, G. Globočki-Lakić, D. Kramar, J. Kopač, New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4, Proceedings, pp. 367 - 375, 2015

• Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique (2015-05)

  B. Sredanović, G. Globočki-Lakić, D. Kramar, J. Kopač, Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique, Proceedings, DEMI 2015, ISBN 978-99938-39-53-8, pp. 293 - 299, May, 2015

• Analysis of Micro-Milling of Hardened Tool Steel (2015-10)

  B. Sredanović, G. Globočki-Lakić, D. Kramar, J. Kopač, Analysis of Micro-Milling of Hardened Tool Steel, Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3, pp. 57 - 62, Oct, 2015

• A predictive model of cutting forces in MQL turning usig genetic algorithm (2016-12)

  Dj. Cica, B. Sredanovic, D. Kramar, A predictive model of cutting forces in MQL turning usig genetic algorithm, pp. 237 - 242, Dec, 2016

• Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach (2017-03)

  Dj. Cica, B. Sredanovic, D. Kramar, Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach, pp. 75 - 79, Mar, 2017

• Environmental Labelling with Type I Eco Labels (2017-05)

  M. Soković, G. Janjić, I. Budak, Z. Tanasić, B. Agarski, M. Ilić, G. Kosec, D. Kramar, B. Kosec, Environmental Labelling with Type I Eco Labels, Proceedings, DEMI 2017, ISBN 978-99938-39-72-9, pp. 798 - 802, May, 2017

• Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning (2017-05)

  G. Globočki-Lakić, B. Sredanović, D. Kramar, J. Kopač, Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning, Proceedings of 15th International Conference on Tribology SERBIATRIB‘17, pp. 487 - 495, May, 2017

• An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning (2017-06)

  Dj. Cica, B. Sredanovic, S. Borojevic, D. Kramar, An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning, pp. 1 - 12, Jun, 2017

• Study on the machinability characteristics of Inconel 718 super alloy during micro-milling (2017-06)

  B. Sredanović, G. Globočki-Lakić, D. Kramar, J. Kopač, Study on the machinability characteristics of Inconel 718 super alloy during micro-milling, Proceedings of the 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017, pp. 375 - 385, Jun, 2017

• Izbor putanje kretanja alata pri obradi složenih tankozidnih aluminijumskih struktura (2018-06)

  S. Borojević, D. Lukić, M. Milošević, J. Vukman, D. Kramar, Izbor putanje kretanja alata pri obradi složenih tankozidnih aluminijumskih struktura, Originalni naučni rad, pp. 2.1 - 2.8, Jun, 2018

• Optimization of process parameters for stabilization and improvement of the turning process capability (2018-09)

  L. Čerče, S. Borojević, D. Kramar, Optimization of process parameters for stabilization and improvement of the turning process capability, Originalni naučni rad, pp. 15 - 20, Sep, 2018

• Experimental research of the influence of high-speed machining parameters on time and surface roughness of thin-walled parts (2018-09)

  J. Vukman, D. Lukić, S. Borojević, M. Milošević, D. Kramar, Experimental research of the influence of high-speed machining parameters on time and surface roughness of thin-walled parts, Originalni naučni rad, pp. 227 - 231, Sep, 2018

• Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach (2013-04)

  Dj. Cica, B. Sredanovic, G. Globocki-Lakic, D. Kramar, Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach, Advances in Mechanical Engineering , Vol. 2013, pp. 1 - 8, Apr, 2013

• Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN (2014)

  Dj. Cica, B. Sredanovic, D. Kramar, Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN, Journal of production engineering, Vol. 17, No. 1, pp. 43 - 46, 2014

• Possibility of hardened steel machining by application of high pressure cooling and lubrication technique (2018-10)

  G. Globočki-Lakić, B. Sredanović, Ž. Babić, D. Kramar, J. Kopač, F. Pušavec, Possibility of hardened steel machining by application of high pressure cooling and lubrication technique, Oct, 2018

• Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method (2024-05)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol. 46, pp. 1 - 14, May, 2024

• Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece (2021-05)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece, 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, pp. 71 - 77, May, 2021