Уноси · Publikacije Univerziteta u Banjoj Luci

Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN (2014)

Dj. Cica, B. Sredanovic, D. Kramar, Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN, Journal of production engineering, Vol. 17, No. 1, pp. 43 - 46, 2014

Analysis of effectiveness on production system for production of the tools for hydraulic press brakers (2014)

V. Jovišević, S. Borojević, G. Globočki-Lakić, Đ. Čiča, B. Sredanović, Analysis of effectiveness on production system for production of the tools for hydraulic press brakers, ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering, Vol. 12, No. 2, pp. 127 - 132, 2014

Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study (2015)

Dj. CIca, B. Sredanovic, D. Kramar, Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, Vol. 50, No. 1, pp. 49 - 64, 2015

Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions (2015-05)

B. Sredanovic, Dj. Cica, Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions, International Journal of Materials and Manufacturing, Vol. 8, No. 2, pp. 586 - 591, May, 2015

Identification of dynamical contact parameters for spindle-holder-tool assembly (2016)

Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Identification of dynamical contact parameters for spindle-holder-tool assembly, Journal of production engineering, Vol. 19, No. 1, pp. 57 - 60, 2016

Dynamic analysis of spindle-holder-tool assembly (2016)

Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Dynamic analysis of spindle-holder-tool assembly, Machine Design, Vol. 8, No. 2, pp. 53 - 56, 2016

Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms (2016-02)

D. Kramar, Dj. Cica, B.Sredanovic, J. Kopac, Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms, AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC, Vol. 30, No. 1, pp. 96 - 106, Feb, 2016

Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach (2017)

Dj. Cica, B. Sredanovic, D. Kramar, Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach, International Journal "Machines, Technologies, Materials", Vol. 4, pp. 186 - 190, 2017

Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts (2017)

Dj. Cica,, Z. Milan, B. Sredanovic, S. Tesic, Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts, Journal of production engineering, Vol. 20, No. 2, pp. 34 - 38, 2017

Prediction of natural frequencies of the tool controlled mode using soft computing techniques (2017-01)

Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Prediction of natural frequencies of the tool controlled mode using soft computing techniques, International Scentific Journal Industry 4.0, Vol. 1, No. 1, pp. 11 - 14, Jan, 2017

A mathematical model for evaluation of intelligence products value (2018)

D. Korac, Dj. Cica, A mathematical model for evaluation of intelligence products value, Journal of Information and Optimization Sciences, Vol. 39, pp. 903 - 926, 2018

Intelligent Process Modeling and Optimization of Porosity Formation in High-Pressure Die Casting (2018)

Dj. Cica, D. Kramar, Intelligent Process Modeling and Optimization of Porosity Formation in High-Pressure Die Casting, INTERNATIONAL JOURNAL OF METALCASTING, Vol. 12, No. 4, pp. 814 - 824, 2018

Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V (2019)

S. Tešić, M. Zeljković, Đ. Čiča, Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V, TEHNIKA - MAŠINSTVO, Vol. 68, No. 5, pp. 677 - 682, 2019

Multi-objective optimization of high-pressure jet-assisted turning of Inconel 718 (2019)

Dj. Cica, D. Kramar, Multi-objective optimization of high-pressure jet-assisted turning of Inconel 718, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 105, No. 11, pp. 4731 - 4745, 2019

Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel (2019)

B. Sredanović, Đ. Čiča, S. Tešić, D. Kramar, Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel, International Journal "Machines, Technologies, Materials", Vol. 13, No. 11, pp. 491 - 494, 2019

Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function (2020)

Dj. Cica, S. Borojevic, G. Jotic, B. Sredanovic, S. Tesic, Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function, TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, Vol. 44, No. 1, pp. 84 - 94, 2020

Machinability investigation and sustainability analysis of high-pressure coolant assisted turning of the nickel-based superalloy Inconel 718 (2023)

Dj. Cica, D. Kramar, Machinability investigation and sustainability analysis of high-pressure coolant assisted turning of the nickel-based superalloy Inconel 718, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART B, JOURNAL OF ENGINEERING MANUFACTURE, Vol. 237, No. 1-2, pp. 43 - 54, 2023

Unosi