Уноси · Publikacije Univerziteta u Banjoj Luci

Additive Manufacturing of Functional Parts based on Material Extrusion Technology (2016)

M. Šljivic, C. Fragassa, A. Pavlović, M. Kraišnik, J. Ilić, M. Stanojević, Additive Manufacturing of Functional Parts based on Material Extrusion Technology, CONTEMPORARY MATERIALS, Vol. VII-2, pp. 178 - 184, 2016

Advanced Investigation on Rapid Prototyping Techniques in Maxillofacial Surgery and Implanting Preparation (2014)

M. Stanojević, M. Šljivić, M. Plančak, D. Đurđević, Advanced Investigation on Rapid Prototyping Techniques in Maxillofacial Surgery and Implanting Preparation, Journal for technology of plasticity, Vol. 39, pp. 11 - 21, 2014

Implemenation of FEM and Rapid Prototyping in Maxillofacial Surgery (2016-06)

M. Šljivić, M. Stanojević, D. Đurđević, Implemenation of FEM and Rapid Prototyping in Maxillofacial Surgery, FME Transactions, Vol. 44, No. 4, pp. 422 - 429, Jun, 2016

Comparing the Accuracy of Professional and Consumer Grade 3D Printers in Complex Models Production (2017)

Sljivic M., Pavlovic A., Ilic J., Stanojevic M., Todorovic S., Comparing the Accuracy of Professional and Consumer Grade 3D Printers in Complex Models Production, FME Transactions, Vol. 45, No. 3, pp. 348 - 353, 2017

Polymers in Additive Manufacturing: the Case of a Water Pump Impeller (2017)

Pavlovic A., Sljivic M., Kraisnik M., Ilic J., Anic J., Polymers in Additive Manufacturing: the Case of a Water Pump Impeller, FME Transactions, Vol. Vol. 45, No. No.3, pp. 354 - 359, 2017

COMPRESSIVE PROPERTIES OF COMMONLY USED POLYMERS IN ADDITIVE MANUFACTURING PROCESSES (2017)

M. Kraišnik, M. Šljivic, J. Anić, J. Ilić, COMPRESSIVE PROPERTIES OF COMMONLY USED POLYMERS IN ADDITIVE MANUFACTURING PROCESSES, ACTA TECHNICA CORVINIENSIS, Vol. 10, No. 2, pp. 33 - 37, 2017

SOME ASPECTS OF DEVELOPMENT OF DUCTILE CRACK IN THE PROCESS OF COLD BULK FORMING (2017)

M. Kraišnik, M. Šljivić, J. Anić, J. Ilić, B. Mijatović, SOME ASPECTS OF DEVELOPMENT OF DUCTILE CRACK IN THE PROCESS OF COLD BULK FORMING, ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering, pp. 47 - 55, 2017

DEVELOPMENT OF SMALL BATCHES OF FUNCTIONAL PARTS USING INTEGRATION OF 3D PRINTING AND VACUUM CASTING TECHNOLOGY (2018)

M. Šljivić, M. Kraišnik, J. Ilić, J. Anić, DEVELOPMENT OF SMALL BATCHES OF FUNCTIONAL PARTS USING INTEGRATION OF 3D PRINTING AND VACUUM CASTING TECHNOLOGY, ACTA TECHNICA CORVINIENSIS, Vol. 11, No. 2, pp. 35 - 38, 2018

PRESOVANJE LEGURE ALUMINIJUMA METODOM PROTUSMJERNOG ISTISKIVANJA (1999-04)

Ž. Babić, M. Šljivić, O. Miletić, PRESOVANJE LEGURE ALUMINIJUMA METODOM PROTUSMJERNOG ISTISKIVANJA, ZBORNIK RADOVA DEMI '99, pp. 76 - 81, Apr, 1999

MEASURUMENT OF THE DEFORMATION FORCE IN DEEP DRAWING PROCESS (1999-04)

Ž. Babić, M. Šljivić, MEASURUMENT OF THE DEFORMATION FORCE IN DEEP DRAWING PROCESS, Proceedings of 2. International Conference on Industrial Tools - ICIT ‘99, pp. 1 - 5, Apr, 1999

NOVA TEHNOLOGIJA-THIXOFORMING (1999-04)

M. Šljivić, O. Miletić, Ž. Babić, NOVA TEHNOLOGIJA-THIXOFORMING, ZBORNIK RADOVA DEMI '99, pp. 66 - 71, Apr, 1999

VISOKOBRZINSKI PROCES PROŠIRIVANJA PRI SPAJANJU CIJEVI U IZMJENJIVAČIMA TOPLOTE (2000-04)

O. Miletić, M. Šljivić, D. Blagojević, Ž. Babić, VISOKOBRZINSKI PROCES PROŠIRIVANJA PRI SPAJANJU CIJEVI U IZMJENJIVAČIMA TOPLOTE, DEMI 2000, ZBORNIK RADOVA- PROCEDINGS, pp. 78 - 81, Apr, 2000

BRZA IZRADA PROTOTIPA PROIZVODA- MULTY-JET MODELING TEHNOLOGIJA (2000-04)

O. Miletić, M. Šljivić, Ž. Babić, M. Bojanović, BRZA IZRADA PROTOTIPA PROIZVODA- MULTY-JET MODELING TEHNOLOGIJA, DEMI 2000, ZBORNIK RADOVA-PROCEEDINGS, pp. 45 - 49, Apr, 2000

THE INFLUENCE OF TRIBOLOGICAL CHARACTEISTICS ON FORMABILITY IN DEEP DRAWING PROCESS (2000-05)

M. Šljivić, Ž. Babić, THE INFLUENCE OF TRIBOLOGICAL CHARACTEISTICS ON FORMABILITY IN DEEP DRAWING PROCESS, Proceedings of TPR 2000, pp. 197 - 202, May, 2000

UTICAJ TRIBOLOŠKIH USLOVA NA GRANIČNI STEPEN PRI DUBOKOM IZVLAČENJU (2001-04)

Ž. Babić, M. Šljivić, D. Adamović, UTICAJ TRIBOLOŠKIH USLOVA NA GRANIČNI STEPEN PRI DUBOKOM IZVLAČENJU, ZBORNIK RADOVA DEMI 2001, pp. 116 - 120, Apr, 2001

NOVE TEHNOLOGIJE U IZRADI KAROSERIJE AUTOMOBILA (2005-05)

Ž. Babić, M. Šljivić, NOVE TEHNOLOGIJE U IZRADI KAROSERIJE AUTOMOBILA, ZBORNIK RADOVA DEMI 2005, pp. 183 - 190, May, 2005

PARAMETRI RAZVLAČENJA LASERSKI ZAVARENIH LIMOVA (2007-05)

Ž. Babić, M. Šljivić, PARAMETRI RAZVLAČENJA LASERSKI ZAVARENIH LIMOVA, ZBORNIK RADOVA DEMI 2007, pp. 213 - 220, May, 2007

Unosi