Unosi

• Energy consumption model of the face milling (2021-05)

  S. Tešić, Đ. Čiča, M. Zeljković, S. Borojević, B. Sredanović, G. Jotić, Energy consumption model of the face milling, Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021, pp. 89 - 93, May, 2021

• Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V (2021-10)

  S. Tešić, M. Zeljković, Đ. Čiča, S. Borojević, B. Sredanović, Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V, Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021, pp. 96 - 101, Oct, 2021

• Identification of dynamical contact parameters for spindle-holder-tool assembly (2016)

  Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Identification of dynamical contact parameters for spindle-holder-tool assembly, Journal of production engineering, Vol. 19, No. 1, pp. 57 - 60, 2016

• Prediction of natural frequencies of the tool controlled mode using soft computing techniques (2017-01)

  Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Prediction of natural frequencies of the tool controlled mode using soft computing techniques, International Scentific Journal Industry 4.0, Vol. 1, No. 1, pp. 11 - 14, Jan, 2017

• Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V (2019)

  S. Tešić, M. Zeljković, Đ. Čiča, Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V, TEHNIKA - MAŠINSTVO, Vol. 68, No. 5, pp. 677 - 682, 2019

• Dynamical Contact Parameter Identification of Spindle-Holder-Tool Assemblies Using Soft Computing Techniques (2020)

  Đ. Čiča, M. Zeljković, S. Tešić, Dynamical Contact Parameter Identification of Spindle-Holder-Tool Assemblies Using Soft Computing Techniques, Facta Universitatis, Series: Mechanical Engineering, Vol. 18, No. 4, pp. 565 - 577, 2020

• Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions (2022-01)

  S. Tešić, Đ. Čiča, S. Borojević, B. Sredanović, M. Zeljković, D. Kramar, F. Pusavec, Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol. 9, No. November 2022, pp. 1427 - 1437, Jan, 2022

• Postprocesiranje NC podataka u okviru savremenih CAD/CAM sistema (2007-05)

  V. Pejić, M. Zeljković, S. Jokanović, S. Tabaković, Postprocesiranje NC podataka u okviru savremenih CAD/CAM sistema, Zbornik radova DEMI 2007, ISBN 978-99938-39-15-6, pp. 175 - 180, May, 2007

• Identifikacija parametara veze dinamičkih sistema korišćenjem funkcije frekventnog odziva, ISBN 978-86-7083-662-4 (2009)

  Đ. Čiča, M. Zeljković, V. Golubović-Bugarski, G. Globočki-Lakić, Identifikacija parametara veze dinamičkih sistema korišćenjem funkcije frekventnog odziva, ISBN 978-86-7083-662-4, Zbrornik radova, pp. 165 - 168, 2009

• Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze (2010)

  Đ. Čiča, M. Zeljković, G. Globočki-Lakić, B. Sredanović, Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze, Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9, pp. 3.22 - 3.27, 2010

• Modeling of dynamical behavior spindle‐holder‐tool assembly (2011)

  Đ. Čiča, M. Zeljković, G. Globočki-Lakić, B. Sredanović, S. Borojević, Modeling of dynamical behavior spindle‐holder‐tool assembly, 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6, pp. 117 - 120, 2011

• Identification of dynamical contact parameters for spindle-holder-tool assembly (2015-09)

  Đ. Čiča, M. Zeljković, B. Sredanović, S. Borojević, Identification of dynamical contact parameters for spindle-holder-tool assembly, pp. 67 - 71, Sep, 2015

• Parts design based on manufacturing features (2015-09)

  S. Borojević, V. Jovišević, V. Todić, M. Zeljković, Parts design based on manufacturing features, Originalni naučni rad, pp. 141 - 144, Sep, 2015

• Prediction of natural frequencies of the tool controlled mode using soft computing techniques (2016-12)

  Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Prediction of natural frequencies of the tool controlled mode using soft computing techniques, pp. 22 - 25, Dec, 2016

• Energy consumption model of the face milling (2021-05)

  S. Tesic, Dj. Cica, M. Zeljkovic, S. Borojevic, B. Sredanovic, G. Jotic, Energy consumption model of the face milling, pp. 89 - 93, May, 2021

• Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts (2017)

  Dj. Cica,, Z. Milan, B. Sredanovic, S. Tesic, Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts, Journal of production engineering, Vol. 20, No. 2, pp. 34 - 38, 2017

• Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks (2012)

  Đ. Čiča, M. Zeljković, G. Globočki-Lakić, B. Sredanović, S. Borojević, Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks, Journal of production engineering, Vol. 15, No. 2, pp. 37 - 40, 2012

• Modelling of dynamical behavior of a spindle-holder-tool assembly (2012)

  Đ. Čiča, M. Zeljković, G. Globočki-Lakić, B. Sredanović, Modelling of dynamical behavior of a spindle-holder-tool assembly, STROJARSTVO, Vol. 54, No. 2, pp. 135 - 144, 2012

• Dynamic analysis of spindle-holder-tool assembly (2016)

  Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Dynamic analysis of spindle-holder-tool assembly, Machine Design, Vol. 8, No. 2, pp. 53 - 56, 2016

• Mjerenje ugaonih stepeni slobode metodom konačnih razlika (2009-05)

  Đ. Čiča, M. Zeljković, V. Golubović-Bugarski, G. Globočki-Lakić, Mjerenje ugaonih stepeni slobode metodom konačnih razlika, Proceedings DEMI 2009, ISBN978-99938-39-15-6, pp. 57 - 62, May, 2009