Unosi

• Analysis of effectiveness on production system for production of the tools for hydraulic press brakers (2014)

  V. Jovišević, S. Borojević, G. Globočki-Lakić, Đ. Čiča, B. Sredanović, Analysis of effectiveness on production system for production of the tools for hydraulic press brakers, ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering, Vol. 12, No. 2, pp. 127 - 132, 2014

• Identification of dynamical contact parameters for spindle-holder-tool assembly (2016)

  Dj. Cica, M. Zeljkovic, B. Sredanovic, S. Borojevic, Identification of dynamical contact parameters for spindle-holder-tool assembly, Journal of production engineering, Vol. 19, No. 1, pp. 57 - 60, 2016

• Analysis of Operational Readiness and Reliability of the Paper Machine System after the Implementation of Model of Influence (2018-05)

  D. Branković, Z. Milovanović, S. Borojević, Analysis of Operational Readiness and Reliability of the Paper Machine System after the Implementation of Model of Influence, TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE, Vol. 25, No. 1, pp. 126 - 134, May, 2018

• Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions (2022-01)

  S. Tešić, Đ. Čiča, S. Borojević, B. Sredanović, M. Zeljković, D. Kramar, F. Pusavec, Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol. 9, No. November 2022, pp. 1427 - 1437, Jan, 2022

• Reakcije novosadskih sorti i linija jare pšenice na različite agroekološke uslove (1990)

  P. Rončević, S. Borojević, M. Malešević, N. Pržulj, M. Dardić, M. Čolović, Reakcije novosadskih sorti i linija jare pšenice na različite agroekološke uslove, pp. 29 - 29, 1990

• Results of the pilot project for early discovery of breast cancer in Republic of Srpska. (2003)

  S. Pavić, L. Šormaz, N. Borojević, B. Topić, R. Gajanin, B. Ribarić, D. Babić, Results of the pilot project for early discovery of breast cancer in Republic of Srpska., 2003

• Development of Application for Analysis of Machinability Index (2009)

  G. Globočki-Lakić, S. Borojević, Đ. Čiča, B. Sredanović, Development of Application for Analysis of Machinability Index, Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4, pp. 251 - 254, 2009

• Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja (2009)

  S. Borojević, B. Sredanović, G. Globočki-Lakić, Đ. Čiča, Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja, 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4, pp. 31 - 34, 2009

• Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema (2009-05)

  B. Sredanović, G. Globočki-Lakić, S. Borojević, Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema, Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6, pp. 255 - 260, May, 2009

• Modeliranje vretenastih glodala primjenom CAD/CAM sistema (2010)

  B. Sredanović, G. Globočki-Lakić, Đ. Čiča, S. Borojević, Modeliranje vretenastih glodala primjenom CAD/CAM sistema, pp. 3.28 - 3.31, 2010

• Vector based approach in definning of universal machinability (2010)

  G. Globočki-Lakić, B. Sredanović, S. Jokanović, S. Borojević, Đ. Čiča, Vector based approach in definning of universal machinability, International Conference on Innovative Technologies, ISBN 978-80-904502-2-6, pp. 326 - 330, 2010

• Modaliteti tehnika Marije Montesori kod rehabilitacije pacijenata sa reumatoidnim artritisom (2010-10)

  N. Borojević, T. Nožica-Radulović, Modaliteti tehnika Marije Montesori kod rehabilitacije pacijenata sa reumatoidnim artritisom, pp. 354 - 355, Oct, 2010

• Modeling of cutting forces with artificial neural networks (2011)

  B. Sredanović, G. Globočki-Lakić, Đ. Čiča, S. Borojević, V. Golubović-Bugarski, Modeling of cutting forces with artificial neural networks, Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3, pp. 123 - 132, 2011

• Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation (2011)

  S. Borojević, V. Jovišević, G. Globočki-Lakić, Đ. Čiča, B. Sredanović, M. Radisavljević, Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation, Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1, pp. 419 - 426, 2011

• Identification of face funcionality with program system for purpose of modular fixture design (2011)

  S. Borojević, V. Jovišević, G. Globočki-Lakić, Đ. Čiča, B. Sredanović, Identification of face funcionality with program system for purpose of modular fixture design, Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6, pp. 197 - 200, 2011

• Laboratories under requirements of directives and standards of European Union (2011-05)

  V. Jovišević, S. Borojević, G. Globočki-Lakić, B. Sredanović, Laboratories under requirements of directives and standards of European Union, Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1, pp. 361 - 366, May, 2011

• Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation (2011-05)

  V. Jovišević, S. Borojević, G. Globočki-Lakić, B. Sredanović, Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation, Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9, pp. 8 - 15, May, 2011

• Analiza obradivosti materijala pomoću aplikativnog računarskog programa (2012)

  G. Globočki-Lakić, B. Sredanović, S. Borojević, Đ. Čiča, V. Jovišević, Analiza obradivosti materijala pomoću aplikativnog računarskog programa, Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2, pp. 81 - 88, 2012

• Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine (2012-05)

  S. Borojević, V. Jovišević, G. Globočki-Lakić, B. Sredanović, Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine, Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7, pp. 1 - 8, May, 2012

• Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU (2012-06)

  V. Jovišević, S. Borojević, G. Globočki-Lakić, B. Sredanović, Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU, Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2, pp. 203 - 209, Jun, 2012