Unosi

• Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio I - Priprema za poređenje sa "najboljom praksom" (benchmarking) (2009-01)

  Z. Milovanović, V. Šijački-Žeravčić, V. Babić, S. Borojević, Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio I - Priprema za poređenje sa "najboljom praksom" (benchmarking), Tehnička dijagnostika, Vol. 8, No. 2, pp. 41 - 45, Jan, 2009

• Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio II - Određivanje pouzdanosti postrojenja u prvom približenju (2009-03)

  Z. Milovanović, V. Šijački-Žeravčić, G. Bakić, M. Đukić, Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio II - Određivanje pouzdanosti postrojenja u prvom približenju, Tehnička dijagnostika, Vol. 8, No. 4, pp. 3 - 8, Mar, 2009

• Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio III - Određivanje fizičkih uzroka pada pouzdanosti (2009-05)

  Z. Milovanović, V. Šijački-Žeravčić, G. Bakić, M. Đukić, Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio III - Određivanje fizičkih uzroka pada pouzdanosti, Tehnička dijagnostika, Vol. 8, No. 4, pp. 11 - 16, May, 2009

• The algoritam of activities for improvement of competitiveness of power-proces plants (2009-06)

  Z. Milovanović, The algoritam of activities for improvement of competitiveness of power-proces plants, Communications in dependability and quality management, An International Journal, Vol. 12, No. 3, pp. 18 - 28, Jun, 2009

• Algoritm meropriяtiй po ulučšeniю konkurentosposobnosti termoэnergetičeskih ustanovok (Častь 1) (2009-12)

  Z. Milovanović, Algoritm meropriяtiй po ulučšeniю konkurentosposobnosti termoэnergetičeskih ustanovok (Častь 1), PROBLEMЫ MAŠINOSTROENIЯ I AVTOMATIZACII (ENGINEERING AND AUTOMATION PROBLEMS), Moskva, No. 4, pp. 68 - 74, Dec, 2009

• Determination of the Engine Torque of a Four Cylinder Four Stroke Diesel Engine on the Basis of Harmonic Analysis of the Crankshaft Angular Velocity (2011-01)

  A. Milašinović, I. Filipović, Z. Milovanović, D. Knežević, Determination of the Engine Torque of a Four Cylinder Four Stroke Diesel Engine on the Basis of Harmonic Analysis of the Crankshaft Angular Velocity, TRANSACTIONS OF FAMENA, Vol. 35, No. 4, pp. 55 - 65, Jan, 2011

• Algoritm meropriяtiй po ulučšeniю konkurentosposobnosti termoэnergetičeskih ustanovok (Častь 2: Pokazateli tehničeskogo, эkonomičeskogo i funkcionalьnogo sostoяnia ustanovki) (2011-01)

  Z. Milovanović, Algoritm meropriяtiй po ulučšeniю konkurentosposobnosti termoэnergetičeskih ustanovok (Častь 2: Pokazateli tehničeskogo, эkonomičeskogo i funkcionalьnogo sostoяnia ustanovki), PROBLEMЫ MAŠINOSTROENIЯ I AVTOMATIZACII (ENGINEERING AND AUTOMATION PROBLEMS), Moskva, No. 1, pp. 44 - 53, Jan, 2011

• Analysis of the sustainability of wind power plants installed on complex terrains: Case study: Ivan Sedlo mountain (2011-01)

  F. Begić, Z. Milovanović, F. Kulić, A. Begić, Analysis of the sustainability of wind power plants installed on complex terrains: Case study: Ivan Sedlo mountain, TERMOTEHNIKA, Vol. 37, No. 1, pp. 115 - 130, Jan, 2011

• Determination of the Flow Rate Through Long Radial Clearances Inside Hydraulic Components (2012-05)

  D. Knežević, Z. Milovanović, A. Milašinović, M. Jocanović, Determination of the Flow Rate Through Long Radial Clearances Inside Hydraulic Components, PROBLEMЫ MAŠINOSTROENIЯ I AVTOMATIZACII (ENGINEERING AND AUTOMATION PROBLEMS), Moskva, No. 2, pp. 23 - 31, May, 2012

• ECONOMICAL EVALUATION OF THE PROJECT ON REPLACEMENT OF HEATING PLANT WITH CO-GENERATION HEAT AND POWER PLANT BY THE END OF 2030. (2013-01)

  Z. Milovanović, D. Knežević, A. Ivanišević, M. Jocanović, S. Mitrović, ECONOMICAL EVALUATION OF THE PROJECT ON REPLACEMENT OF HEATING PLANT WITH CO-GENERATION HEAT AND POWER PLANT BY THE END OF 2030., METALURGIA INTERNATIONAL, Vol. XVIII (2013), No. 04, pp. 234 - 241, Jan, 2013

• Analiza stabla otkaza protočnog parnog kotla TE Ugljevik (2014-03)

  T. Mačkić, D. Ćatić, Z. Milovanović, Analiza stabla otkaza protočnog parnog kotla TE Ugljevik, ENERGIJA, EKONOMIJA, EKOLOGIJA, Vol. XVI, No. 3-4, pp. 309 - 314, Mar, 2014

• THE INFLUENCE OF THERMODYNAMIC STATE OF MINERAL HYDRAULIC OIL ON FLOW RATE THROUGH RADIAL CLEARANCE AT ZERO OVERLAP INSIDE THE HYDRAULIC COMPONENTS (2016-12)

  D. Knežević, A. Milašinović, Z. Milovanović, S. Laloš, THE INFLUENCE OF THERMODYNAMIC STATE OF MINERAL HYDRAULIC OIL ON FLOW RATE THROUGH RADIAL CLEARANCE AT ZERO OVERLAP INSIDE THE HYDRAULIC COMPONENTS, THERMAL SCIENCE, Vol. 20, No. Suppl. 5, pp. S1461 - S1471, Dec, 2016

• Instantaneous flywheel torque of IC engine grey-box identification (2017-11)

  A. Milašinović, Z. Milovanović, D. Knežević, J. Škundrić, Instantaneous flywheel torque of IC engine grey-box identification, IOP Conference series: Materials Science and Engineering, Vol. 294, pp. 1 - 12, Nov, 2017

• Analysis of Operational Readiness and Reliability of the Paper Machine System after Implementation of Model of Influence (2018-05)

  D. Branković, Z. Milovanović, S. Borojević, Analysis of Operational Readiness and Reliability of the Paper Machine System after Implementation of Model of Influence, TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE, Vol. 25, No. No.Supplement 1, pp. 126 - 134, May, 2018

• RISK OF THERMAL POLLUTION OF THE DANUBE PASSING THROUGH SERBIA DUE TO THERMAL POWER PLANTS (2018-12)

  M. Laković-Paunović, M. Banjac, J. Bogdanović-Jovanović, M. Jović, Z. Milovanović, RISK OF THERMAL POLLUTION OF THE DANUBE PASSING THROUGH SERBIA DUE TO THERMAL POWER PLANTS, THERMAL SCIENCE, Vol. 22, No. Suppl- 5, pp. S1323 - S1336, Dec, 2018

• Modified method for the optimum reliability estimate of condensing thermal power plant (2000-12)

  Z. Milovanović, L. Papić, J. Knežević, Modified method for the optimum reliability estimate of condensing thermal power plant, Proceedings 10th International MIRCE Symposium, MIRCE Akademy, Exeter, UK, 5(7): 141-152., pp. 141 - 152, Dec, 2000

• Clearances in hydraulic components effect of obliteration of radial clearances (2011)

  D. Knežević, V. Savić, A. Milašinović, Z. Milovanović, Clearances in hydraulic components effect of obliteration of radial clearances, Zbornik radova, Maribor, pp. 112 - 122, 2011

• Analysis of changes of bulk modulus of mineral oil-effects on the dynamic behavior of hydraulic actuators (2011)

  D. Knežević, A. Milašinović, Z. Milovanović, V. Savić, Analysis of changes of bulk modulus of mineral oil-effects on the dynamic behavior of hydraulic actuators, Zbornik radova, Kragujevac, pp. 370 - 375, 2011

• Analysis of influence of length of development of boundary layer on flow rate through radial clearence within haydraulic control components (2011-05)

  D. Knežević, A. Milašinović, Z. Milovanović, Analysis of influence of length of development of boundary layer on flow rate through radial clearence within haydraulic control components, Zbornik radova, Banja Luka, pp. 71 - 76, May, 2011

• Effect of changes of viscousity of mineral oil in the function of pressure on flowing through a long radial clearance (2011-05)

  D. Knežević, A. Milašinović, Z. Milovanović, V. Savić, Effect of changes of viscousity of mineral oil in the function of pressure on flowing through a long radial clearance, Zbornik radova, kragujevac, pp. 376 - 381, May, 2011